WEG CFW300 V1.3X, Руководство по программированию

Страница: 10 / 157

0
Quick Reference of Parameters, Alarms and Faults
0-2 | CFW300
Param. Description Adjustable Range Factory Setting Prop. Page
P029
Power HW Configuration 0 = Non-identified
1 = 1.6 A / 110 V
2 = 2.6 A / 110 V
3 = 4.0 A / 110 V
4 = 6.0 A / 110 V
5 = 1.6 A / 220 V
6 = 2.6 A / 220 V
7 = 4.0 A / 220 V
8 = 6.0 A / 220 V
9 = 7.3 A / 220 V
10 = 10 A / 220 V
11 = 15.2 A / 220 V
According the
inverter model
ro 6-2
P030 Module Temperature 0.0 to 200.0 ºC (32 °F to 392 °F) ro 15-4
P037 Motor Overload Ixt 0.0 to 100.0 % ro 14-2
P038 Encoder Speed -9999 to 9999 rpm ro 15-4
P039
Encoder Pulse Counter 0 to 9999 ro 15-4
P045
Enabled Fan Time 0 to FFFF (hexa) ro 15-4
P047 CONFIG Status 0 to 999 ro 5-5
P048 Present Alarm 0 to 999 ro 14-6
P049 Present Fault 0 to 999 ro 14-6
P050 Last Fault 0 to 999 ro 14-6
P051 Last Fault Current 0.0 to 40.0 A ro 14-6
P052
Last Fault DC Link 0 to 524 V ro 14-7
P053
Last Fault Frequency 0.0 to 400.0 Hz ro 14-7
P054 Last Fault Temperature 0.0 to 200.0 ºC (32 °F to 392 °F) ro 14-7
P060 Second Fault 0 to 999 ro 14-6
P070 Third Fault 0 to 999 ro 14-6
P080 Last Fault in “Fire Mode” 0 to 999 0 ro 14-6
P081 Second Fault in “Fire Mode” 0 to 999 0 ro 14-6
P082 Third Fault in “Fire Mode” 0 to 999 0 ro 14-6
P100
Acceleration Time 0.1 to 999.9 s 5.0 s 11-1
P101
Deceleration Time 0.1 to 999.9 s 10.0 s 11-1
P102 Acceleration Time 2
nd
Ramp 0.1 to 999.9 s 5.0 s 11-1
P103 Deceleration Time 2
nd
Ramp 0.1 to 999.9 s 10.0 s 11-2
P104 S Ramp 0 = Inactive
1 = Active 0 cfg 11-2
P105
Selection 1
st
/2
nd
Ramp 0 = 1
st
Ramp
1 = 2
nd
Ramp
2 = DIx
3 = Serial/USB
4 = Reserved
5 = CO/DN/DP
6 = SoftPLC
0 11-3
P106 Emer. R. Acceleration Time 0.1 to 999.9 s 5.0 s 11-2
P107 Emer. R. Time Deceleration 0.1 to 999.9 s 5.0 s 11-2
P120 Speed Ref. Backup 0 = Inactive
1 = Active
2 = Backup by P121 1 7-7
P121 Reference via HMI 0.0 to 400.0 Hz 3.0 Hz 7-8
P122
JOG Reference -400.0 to 400.0 Hz 5.0 Hz 7-8
P124
Multispeed Ref. 1 -400.0 to 400.0 Hz 3.0 Hz 7-8
P125 Multispeed Ref. 2 -400.0 to 400.0 Hz 10.0 (5.0) Hz 7-8
P126 Multispeed Ref. 3 -400.0 to 400.0 Hz 20.0 (10.0) Hz 7-8
P127 Multispeed Ref. 4 -400.0 to 400.0 Hz 30.0 (20.0) Hz 7-8
P128 Multispeed Ref. 5 -400.0 to 400.0 Hz 40.0 (30.0) Hz 7-9
P129 Multispeed Ref. 6 -400.0 to 400.0 Hz 50.0 (40.0) Hz 7-9
P130 Multispeed Ref. 7 -400.0 to 400.0 Hz 60.0 (50.0) Hz 7-9
P131
Multispeed Ref. 8 -400.0 to 400.0 Hz 66.0 (55.0) Hz 7-9
P133
Minimum Frequency 0.0 to 400.0 Hz 3.0 Hz 7-7
P134 Maximum Frequency 0.0 to 400.0 Hz 66.0 (55.0) Hz 7-7