WEG CFW300 V1.3X, Руководство по программированию

Страница: 43 / 157

Identification of the Inverter Model and Accessories
CFW300 | 6-1
6
6 IDENTIFICATION OF THE INVERTER MODEL AND ACCESSORIES
In order to check the inverter model, see the code on the product nameplate on the side of the inverter.
Once the inverter model identification code is checked, it is necessary to interpret it in order to understand its
meaning. Refer to chapter 2 General Information of the CFW300 user’s manual.
Below are the parameters related to the inverter model which change according to the inverter model and version.
Those parameters must comply with the data read on the product identification label.
6.1 INVERTER DATA
P023 - Main Software Version
P024 - IO's Expansion Accessory Software Version
P025 - Communication Accessory Software Version
Adjustable
Range:
0.00 to 99.99 Factory
Setting:
Properties:
ro
Description:
They indicate the software versions of the microprocessors: main, on the control card C300X and accessories,
on the accessories connected according to parameters P027 and P028.
P613 – Software Revision
Adjustable
Range:
-9999 a 9999
Factory
Setting:
According
to software
revision
Properties:
ro
Access Groups
via HMI:
READ
Description:
This parameter is a counter that indicates the software revision. It is automatically generated by the machine
that generated the firmware.
P027 - Configuration of the IO's Expansion Accessories
P028 - Configuration of the Communication Accessories
Adjustable
Range:
0 to 10 Factory
Setting:
Properties: ro
Description:
These parameters identifies the accessories connected to the product. The following tables present the
accessories that depend on parameters P027 and P028.