WEG CFW300 V1.3X, Руководство по программированию

Страница: 99 / 157

Digital and Analog Inputs and Outputs
CFW300 | 12-7
12
P251 - AO1 Function
P254 - AO2 Function
Adjustable
Range:
0 = Speed Ref.
1 = Not Used
2 = Real Speed
3 and 4 = Not Used
5 = Output Current
6 = Not Used
7 = Active Current
8 to 10 = Not Used
11 = Motor Torque
12 = SoftPLC
13 to 15 = Not Used
16 = Motor Ixt
17 = Not Used
18 = Content of P696
19 = Content of P697
20 = Not Used
21 = Application Function 1
22 = Application Function 2
23 = Application Function 3
24 = Application Function 4
25 = Application Function 5
26 = Application Function 6
27 = Application Function 7
28 = Application Function 8
29 = Control Setpoint (PID Controller Application)
30 = Process Variable (PID Controller Application) Factory
Setting:
P251 = 2
P254 = 5
Properties:
Description:
These parameters sets the functions of the analog outputs, according to function and scale presented in Table
12.3 on page 12-7 .
Table 12.3: Full scale of the analog output
Function Description Full Scale
0 Speed reference at the input of the ramp P001 P134
2 Effective speed at the inverter output P134
5 Total output current RMS 2 x P295
7 Active current 2 x P295
11 Torque on the motor in relation to the rated torque 200.0 %
12 SoftPLC scale for analog output 32767
16 Ixt overload of the motor (P037) 100 %
18 Value of P696 for analog output AOx 32767
19 Value of P697 for analog output AOx 32767
29 Control Setpoint (PID Controller Application)
(*)
30 Process Variable (PID Controller Application)
(*)
(*) For further details refer the Chapter 18 APPLICATIONS on page 18-1 .