manualshive.com logo in svg

Wavetek 4040D, Руководство по эксплуатации, Страница: 92 / 136

Поделиться
Скачать
Wavetek 4040D Скачать руководство пользователя страница 92

                                                              7-13

7.3.10 Canceling an Auto test

While performing an 

Autotest

, you will not be able to select other

measurement modes without first canceling the test in progress.
Doing this will result in an incomplete Autotest.  You will not be able
to resume the previously configured test.

Press the 

 soft key to cancel the 

Autotest

. The instrument will

display a warning message and ask you to confirm your request.

7.4

AUTOTEST RESULTS

Upon completion of the Autotest, the display shows the 

Autotest

Results

  screen. This allows you to view or print Autotest results.

1. Use the up/down arrow keys to select a file, then press the

View

 soft key.

2. The 

Print All

 soft key is available to print all intervals from all

files in the directory.

3. The 

Info

 soft key displays the test location characteristics for

the selected file.  This is the information that was logged
when you configured the test.  The items presented depend
on the location type that you selected.

4. Information provided on each interval includes viewing

Autotest Files: Upon selecting the desired Autotest file, you
are presented with a list of intervals that are contained within
the file.  The list includes the interval number, date, time and
temperature when the interval was recorded, and Pass/Fail
results.

5. An "X" in the Pass/Fail column indicates an overall failure of

the measurements taken during that interval. A check mark
indicates that all measurements were within the specified
limits.

NOTE: Immediate Autotest sequence run consist only of one
interval.

Содержание 4040D









































































































































Отзывы:

Нет отзывов