10-13
11. Audio Offset 1 (MHz): Specifies the audio offset of the
channel. Use the up/down arrow keys or keypad and the
Enter
soft key.
12. Audio Offset 2 (MHz): Specifies the offset for the
second audio carrier of a Dual channel. . Use the up/down
arrow keys or keypad and the
Enter
soft key.
F.
Delete Unused Channels
When the plan has been built, you can delete unused
channels, if appropriate. Doing this frees memory for other
uses and "un-clutters" the channel plan.
1. Select Delete Unused Channels in the Channel Plan
menu, and press the NEXT soft key as prompted by the Edit
Bar.
2. The screen warns you that the deletion cannot be undone,
that ALL channels not enabled will be deleted.
3. Press the
OK
soft key to delete unused channels; press
the
OK
soft key to return to Channel Plan menu.
NOTE:
SOME CHANNEL PLANS HAVE INTERLACED
CHANNELS. TO PREVENT STEALTHTRAK FROM
INTERFEING. DELETE INTERLACED CHANNELS FROM
CHANNEL PLAN PRIOR TO BUILDING SWEEP POINTS.
G.
Specify Auto Measurements:
This enables you to specify one or all three measurements
(C/N, Hum, Mod) for inclusion at any/all TV channels in your
Plan
1. Select Specify
Auto Measurements
, press Edit Bar soft
key, and Figure 10-10,
Auto Measurements
appears.