manualshive.com logo in svg

Wavetek 4040D, Руководство по эксплуатации, Страница: 106 / 136

Поделиться
Скачать
Wavetek 4040D Скачать руководство пользователя страница 106

   8-8

If you enabled the 

Sweep File Overlay

 feature in the 

Sweep

Receiver Setup

 menu, you can select a sweep measurement file to

be viewed simultaneously with the "live" sweep.

The sweep file is selected from the View Measurement Files screen
the same as if it were to be viewed.  To view the Sweep screens,
press the 

View

 soft key. When the 

Sweep File Overlay

 option has

been enabled, the live response will overlay the stored response, 

if

the following conditions are met:

1. The current sweep mode (Sweepless, StealthTrak Fwd,

StealthTrak Rev) matches the mode under which the sweep file
was stored.

2. The channel plans for the stored and live sweep match. If sweep

overlay is not possible, a message appears, explaining the
situation.

3. The names of the file being viewed and the currently selected

reference appear beneath the marker information.

4. The Level and Frequency adjustments affect both the stored

and live sweeps.  Reference Limits Checking and Tilt
Compensation affect the live sweep only.  The marker values
indicate the levels of the live sweep.  Auto Scale affects the live
sweep data.

Referring to Figure 8-4, the stored sweep response display is a gray-
filled area.  The live response appears as a solid line superimposed,
or overlaid, on top of the stored sweep response.  The live response
is updated continuously.

Содержание 4040D









































































































































Отзывы:

Нет отзывов