manualshive.com logo in svg

Wavetek 4040D, Руководство по эксплуатации, Страница: 104 / 136

Поделиться
Скачать
Wavetek 4040D Скачать руководство пользователя страница 104

   8-6

1

                 2

3

Figure. 8-3: Sweep References

To store a sweep as a reference, several traces are averaged.  If you
do not wait for enough traces before entering the 

Sweep

References

 menu, an error message will appear saying:

“SORRY…not enough sweeps have occurred to store an accurate
reference.

  

Please allow more time to sweep.”

  With reference to

Figure 8-3,

•

 

Use the up/down arrow keys to select a reference.

•

 

To use the currently highlighted file as a reference, press Enter.

•

 

To mark several reference files, use the 

Mark

 button (item #2).

•

 

To delete all the files marked, or the current file, if none are
marked, press the 

Delete

 button (item #3).

Different types of sweeps can be stored as references.  The Stealth
instruments mark them differently, and displays FDSWP for forward
references, RVSWP for reverse references, and SWPLS for
Sweepless

 Sweep references.  The file name and date stored are

also shown for each file.

If the channel plan has changed since a reference was stored, the
reference is obsolete and can no longer be used.  If you select an
obsolete reference, a warning message appears when the program
enters Sweep mode, and the default reference will be used.
Wavetek recommends that obsolete references be deleted, to free
memory for additional references and files.

Содержание 4040D









































































































































Отзывы:

Нет отзывов