3-12
automatically sets all parameters to the factory default values
after the unit is turned off and on.
•
Display Test. Allows you to test the operation of the display.
Select
Display Test
and press
↵
ENTER. This activates Figure 3-
7, Display Test This test merely checks the on/off properties of
the screen.
Any left soft key toggles the screen On/Off.
Any right soft key moves to the previous screen.
Figure 3-7: Display Test
3.5.3 Measurements Configuration
With the Setup Menu of Figure 3-4 visible, press the soft key on
either side of
Measurements
. Seven variables are to be adjusted in
this part of the configuration. In each case, use the up/down soft
keys to scroll though the list, and change the variables as indicated
by the Title Bar. Press the
↵
ENTER Soft key when it appears, to
select the
edit box
for changes.
•
Temperature Units. Select the correct temperature units
(degrees Celsius or degrees Fahrenheit).