Wavetek 4040D Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 136

Wavetek 4040D Скачать руководство пользователя страница 85

7-6

7.3.1 Choose Location

Refer to Figure 7-3. You can log information about the location at
which you are performing the test. The information is stored in the
Autotest file along with the measurement data. It will be available
during viewing and printing Autotest results. This first screen
presents you with a list of available locations.

NOTE: If you are not interested in logging the information, select
NONE from the list. The instrument will present you with only the
steps required to configure the test.

Figure 7-3: CHOOSE LOCATION

.

•

Existing Location

: Scroll with the up/down arrow keys to select

test location, the press OK.

•

New Location

: Press +Flag to create a

New Location

.

7.3.2 Edit Location

At this screen, enter the information for a new or existing location.
Use the up and down arrows to select the item to be edited. The
items that appear in the list depend on the type of location you have
selected. If you regularly perform tests at this location, you can save
it for future use so that you only need to enter the information once.

To do this, press the

soft key and enter a name for the location.

«
...
83
84
85
86
87
...
»

Содержание 4040D









































































































































Отзывы:

Нет отзывов