7-2
Figure 7-1: Autotest Main Menu
7.2
TEST LOCATIONS
Test locations allows you to record location-parameter-specific data
to the test location. You can create a new location, or select one
from the list. There are five location types:
Headend, Trunk Amp,
Line Extender, Fiber Node, and Field Test
. You can create test
locations directly on the instrument or use the SteathWare Data
Analysis software and download information to he unit. In either
case the test location data in the
Autotest Reports
includes test
location data.
7.2.1 Parameters and Test Location Types
Tables 7-1 and 7-2 provide information about the five types of test
locations (
Headend, Trunk Amp, Line Extender, Fiber Node, and
Field Test
), and the parameters that apply to each type. Table 7-1
lists the ten Units and Limits of Changes for each type. Table 7-2
shows which parameters apply for each type. NOTE: the
Headend
type has no parameters; a Field Test Location has only the Area
Field.