Vicon RO-M EW, Руководство пользователя

Страница: 67 / 225

Before first use
67
Setting the safety clutch
There is a safety clutch on the machine side of the coupling shaft. This
safety clutch protects the machine against overloading.

First check the setting of the pressure springs in the safety clutch.
The spring length must be 26 mm.
A static calibration test can be performed with a torque wrench.

Set the torque wrench to 400 Nm.
Skidding should occur as soon as it is turned.
TIP
It is possible that the coupling needs to be “separated out” at a higher
torque the First run.
Always mount the check chains of the protection sleeves
The check chains prevent the protection sleeves from rotating with the
coupling shaft.
Crop or pieces of clothing can be wound around rotating protection
sleeves and cause material damage and possibly severe physical
injury.

Mount the check chains to both outer edges of the coupling shaft
protective sleeves.

Mount the other ends of the chains to a fixed point of the tractor,
respectively the machine.