Vicon RO-M EW, Руководство пользователя

Страница: 127 / 225

Activities before spreading
127
Driving through an external signal must then be accepted in the ‘Curve
Calibration’ screen.

See section »Set ISOBUS communication« on page 88.
The drive for the external system is switched on or off with this screen,
as required. The external system can also be disengaged by switching
to distributing a preset similar application rate. The selected
application rate must then first be entered.

See section »Application rate« on page 112.
If control through an external system has been engaged a ‘TC’ symbol
will appear at the bottom of the screen next to the clock
If the control system receives a value for the application rate of the
external system a symbol will be blinking shortly at the input field for
the application rate at the top of the main screen.
Manual over and under dosing is still possible. As soon as the control
system receives a new application rate that is different and the
application rate is adjusted, manual adjustment will no longer be
possible. If you would like to keep over or under dosing it will have to
be entered anew.
S
Engaging external system
S
Selected application rate
Symbol for receiving application
rate