Use in the field
169
Setting
The spreading charts indicate the correct setting for the TrimFlow and
the relevant rpm for the PTO shaft and the spreading discs.
If the settings of the TrimFlow are not given in the relevant spreading
chart they can be obtained in the following sources:
•
the spreading chart service provided on the Internet,
See section »Online spreading chart service« on page 104.
Always check the settings of the TrimFlow by performing the test as
described in
section »Testing the spreading pattern of TrimFlow« on page 145.
I
NDICATION
The type of fertiliser is determined when adjusting the spreader, as
described in
section »Determine the type and pattern of the granules« on page
100.
you can choose from 2 settings from the chart:
•
environmental setting,
•
yield setting.
The loss over the field edge will be equal to or less than the
environment standard (EN-13739) in the environment setting. Always
use this setting when working next to surface water! The result is that
the cover at the field edge of the property is not optimum.
In the yield setting the loss over the field edge will exceed the
environment standard (EN-13739). Therefore, never use this setting
next to surface water. Cover towards the border is very good with this
option.
Содержание RO-M EW
Страница 42: ...Getting familiar with the machine 42 Menu structure...
Страница 43: ...Getting familiar with the machine 43...
Страница 218: ...Notes 218 Notes...
Страница 219: ...Notes 219...
