Vicon RO-M EW, Руководство пользователя

Страница: 139 / 225

Activities before spreading
139
Testing the spreading
pattern of the border
spreading plate
When using the border spreading plate the aim is to obtain maximum
distribution to the border with minimum loss in the ditch.
This is why the border spreading plate should be tested. Do not
perform this test next to the ditch, but mark a line behind which the
notional ditch is.
Operation

Switch the tractor off, remove the key from the ignition and engage
the parking brake of the tractor.

Disconnect the right spreading disc by sliding the connector to the
right. Secure the connector with a lock clip.

Attach the border spreading plate. We recommend that the border
spreading plate be mounted with the triangle on the fixing plate.
Indication
Check that the vanes do not touch the border spreading plate!

Set the spreader as per the details given in the spreading chart for
the selected working width that most closely matches the fertiliser,
seeds or granules and the instructions in section »One-sided
boundary spreading with the border spreading plate«
(height of
the spreading disc = 75 cm above the troughs) .

Place 1 trough in the middle of the tractor tracks. The centre of the
driving track must be 2 metres from the line behind which the
notional ditch is located.

Place 1 trough on the land next to the notional border ditch and 2
troughs next to each other in the notional ditch.
Indication
Position the troughs horizontally with a spirit level!
X
Y
Border spreading plate
2 m (7 ft)
Connector