Vicon RO-M EW, Руководство пользователя

Страница: 54 / 225

Before first use
54
Setting the wheel sensor
The wheel sensor must never touch the cams of the wheel rings!

Set the space between the wheel sensor and the cams to 3.5 mm
for the wheel ring with a diameter of 420 mm and 4.5 mm for the
wheel ring with a diameter of 350 mm by shifting the wheel sensor
in the clamp.

Fix the locking bolt.
Indication
If the distance between the wheel sensor and wheel ring is too great
the wheel sensor would not recognise the various cams. Then no
pulses are given off and the system does not measure the driving
speed. You can check and test the operation of the sensor by means
of the indicator light that is fitted behind the sensor. If the wheel sensor
recognises a separate cam or another measuring point, the indicator
light comes on. If the cam or measuring point is past, the indicator light
must go out again.
Wheel sensor cable

Lay the cable to the tractor ECU and connect it.

See the user's manual of the tractor ECU, control box or tractor.

Tie the cable down.
Lead the cable of the wheel sensor in such a way that it never
becomes taut during complete wheel extension.
Sensor Wheel ring
Clamp
Clearance of 3.5-4.5 mm