Vicon RO-M EW, Руководство пользователя

Страница: 93 / 225

System settings
93
Include the weight of all accessories
Whenever you fit or remove spreader accessories, you must
recalibrate the spreader weight each time.
You must also do this when you have emptied the hopper but the
control system indicates that a few kilograms of fertiliser are still in the
hopper.

Empty the hopper, clean the machine and wait for it to dry.

Position the spreader horizontally and vertically, by means of the
top link and the lift rod adjustment.

Place the tractor on a horizontal base.
From the ’Hopper&Act Calibration’ screen:

Press the hopper calibration key to go to the hopper calibration
screens.

Press on the input field.
The popup keyboard appears on the screen.

Enter the actual value such as it is displayed in the below table.
The spreader weights in the chart are:
•
including the sieves and the hopper extensions that come with the
stated model.
•
excluding the weight of the three-point weighing unit
Spreader weight (kg) RO-M EW 1100 RO-M EW 1550 RO-M EW 2000
Without accessories* 324 347** 370***
Accessory weight (kg)
Hopper cover 38,5
TrimFlow 20,5
Lighting set 2,1
Empty hopper set 3,1
Border spreading plate 3,9
28 meter set 1,1
Ladder set 11,5
Wheels set 33
Hydraulic border spreading
plate 17,2
* The gross weight of the spreader without the three-point weighing unit (- 76 kg)
** With 1 hopper extension
*** With 2 hopper extensions