Vicon RO-M EW, Руководство пользователя

Страница: 167 / 225

Use in the field
167
After border spreading :

Switch on the right or left spreading disc again by pressing the
open key.

Switch the tractor off, remove the key from the ignition and engage
the parking brake of the tractor.

Remove the border spreading plate or put the hydraulic border
spreading plate in the transport position.

Reconnect the drive of the right or left spreading disc.
Driving pattern
Two different driving patterns can be used, depending on the situation
on your land.
Working from sprayer tramlines (situation A):

Drive the first run with the middle of the tractor about 2 metres from
the field edge. Decrease the PTO shaft rpm to 400 rpm.

Remove the border spreading plate at the end of the first pass of
put the hydraulic border spreading plate in the transport position,
but leave the right or left spreading disc disconnected and the
dosing unit closed,

see the methods above.

Increase the PTO shaft rpm to 540 rpm.

Drive the second pass in the first sprayer tramline.

After the second operation, connect the right or the left spreading
disc again.

Open the right spreading disc dosing unit by pressing the open
key.
Working without sprayer tramlines (situation B):

Drive the first run with the middle of the tractor about 2 metres from
the field edge. Decrease the PTO shaft rpm to 400 rpm.

Remove the border spreading plate at the end of the first pass or
put the hydraulic border spreading plate in the transport position.

Reconnect the drive of the right or left spreading disc.

Open the right spreading disc dosing unit by pressing the open
key.

Drive the second pass at 1 working width (X metres) from the field
edge. Maintain the distance with the field edge carefully by using
pickets, for instance.