Activities before spreading
133
General instructions
Check the preset dosing setting and the discharge point.
Check the height
(75 cm above the troughs)
and the position
(angle) of the spreader.
Check the rpm of the PTO shaft and the spreading discs.
Always place the buckets
horizontally
on the floor.
Place the buckets at a maximum distance of 4 metres. Make sure
you have additional buckets for testing working width of more than
24 metres.
Do not use the spreader while it is raining or with high humidity.
This will cause the fertiliser to cling to the troughs, which would not
provide the desired results.
Do not spread with wind speeds of more than 3 m/s (wind force of
2).
Test the left and right
spreading patterns
The left and right spreading discs must spread the same volumes of
fertiliser to ensure good distribution. Check this every year!
I
NDICATION
This test describes a working width of 18 metres. You are of course
free to run the test for a different working width. Divide the buckets at
equal distances along the working width.
Operation
Switch the tractor off, remove the key from the ignition and engage
the parking brake of the tractor.
Disconnect the left spreading disc by sliding the connector to he
left. Secure the connector with a lock clip.
Search the correct discharge position to spread over 18 metres in
the best comparable fertiliser, seeds or granules spreading chart
and set the handle accordingly.
See section »Fine application«
on page 115 and the foreword
of the spreading chart book.
Connector
Содержание RO-M EW
Страница 42: ...Getting familiar with the machine 42 Menu structure...
Страница 43: ...Getting familiar with the machine 43...
Страница 218: ...Notes 218 Notes...
Страница 219: ...Notes 219...
