Vicon RO-M EW, Руководство пользователя

Страница: 145 / 225

Activities before spreading
145
Testing the spreading
pattern of TrimFlow
When using the TrimFlow, the aim is to obtain maximum distribution at
the border with minimum loss in the ditch.
This is why the TrimFlow working has to be tested. Do not perform this
test next to the ditch, but mark a line behind which the notional ditch is.
Operation

Set the spreader as per the details given in the spreading chart for
the selected working width that most closely matches the fertiliser,
seeds or granules
(height of the spreading disc = 75 cm above
the troughs) .

Operate the hydraulic valve for a few seconds to bring the
TrimFlow to working condition and to pressurise the accumulator.

Close the taps in the hydraulic hose to prevent the TrimFlow from
ending up in a different position by accident.

Switch the tractor off, remove the key from the ignition and engage
the parking brake of the tractor.

Set the TrimFlow to the ‘environment setting’ as per the details
given in the spreading chart for the desired working width or based
on the calculation in

section »Boundary track spreading with the TrimFlow« on page
168.

Place 1 trough on the land next to the notional border ditch and 1
trough adjacent to the notional ditch.
I
NDICATION
: Position the troughs horizontally with a spirit level!

Place 1 trough in the middle of the tractor tracks. The driving track
must be half a working width from the notional ditch. Divide the
additional buckets uniformly between the track and the notional
ditch.
½X m (½X ft)
X/ 10 m (ft) X /10 m (ft) X /10 m (ft) X /10 m (ft) X /10 m (ft)
Tap closed
TrimFlow