Vicon RO-M EW, Руководство пользователя

Страница: 19 / 225

Safety
19
Coupling shaft
Use the correct coupling shaft
Only use coupling shafts complying with the manufacturer’s specifi-
cation for that specific use! In order to ensure protection of both man
and machine exercise extreme caution when performing activities with
or at a coupling shaft other than those described in this manual or on
the instruction provided on the coupling shaft.
Modifications to and other special activities at coupling shafts are only
permitted with the explicit written instruction and approval of the
manufacturers of both the machine and the coupling shaft. Use the
correct tools and original parts to ensure good performance and
maximum safety. The use of an incorrect coupling shaft may damage
the machine.
Mount the appropriate protection
Externally accessible coupling shafts, the tractor's PTO shafts and
machine input-axle must be equipped with appropriate guards and
tubes. Working without protection may cause serious or lethal injuries.
Replace protective coupling shaft tubes in a timely manner
Replace the coupling shaft protection sleeves upon the first signs of
wear and tear. Protection sleeves may get worn out without being
noticed. Worn or damaged protection sleeves may cause serious or
lethal injuries.
Protect the PTO shaft end well
Slide the protection sleeve over the PTO shaft as soon as the coupling
shaft has been removed. Clothing could get entangled with an
unprotected PTO shaft end and could lead to serious injury.
Hydraulic system
Hydraulic oil is under high pressure
Never try to stop a leak with your fingers. Never try to locate a
hydraulic leak or contain it by hand. When inspecting always use a
piece of wood or something similar and wear safety goggles and
gloves. Liquid under high pressure can easily penetrate skin and
clothes and may cause severe injuries. In the event of injury, contact
your physician immediately!
Do not exceed the maximum hydraulic pressure of 200 bars
Prevent the pressure in the hydraulic system from exceeding 200
bars! Working with higher pressure may damage your machine and
result in dangerous situations.