Valco baby MCP-25/MS, Руководство пользователя

Страница: 78 / 179

Section 8 — Setup Menu MCP-25/MS
Valco Cincinnati 8-10 MC051 (July 2002)
Tolerance
Configuration
To configure tolerance levels, follow these steps:
1. Press F2 (Tol). The “Tolerance level +/-
” configuration screen displays
(Figure 8-11).
2. Use the arrow keys to move the cursor
to the parameter you want to change
(see Tolerance-Level Configuration
Parameters below).
3. Use the numeric keypad to type a value
for the parameter, or use the scroll
buttons to select a value.
4. Either press the ENTER button or wait 3
seconds. The new value takes effect.
F2
Tolerance-Level Configuration Parameters
Start
—Tolerances at the beginning of a glue line
Gap
—Tolerated gap
End
—Tolerance at the end of the glue line
Volume
—Volume tolerance (variation to learned glue value)
Figure 8-11. Tolerance Level +/- Configuration Screen
Mark.V Report Section Clock
Tolerance level +/-
>>>
F1 F2 F3
F4 F5
1-large
2-middle
3-small
Start
0.20
0.10
0.05
Gap
0.20
0.10
0.05
End
0.50
0.20
0.10
Amount
050%
040%
030%