Valco baby MCP-25/MS, Руководство пользователя

Страница: 130 / 179

Section 14 — Job-Management Menu
MCP-25/MS
Valco Cincinnati 14-6
Creating a New Current Job
F1
This function is used when you want to replace the
current job with a new current job. To create a new
current job, follow these steps:
1. Press F1 (New).
Note! If the previous job has not been saved
in memory, the “Current job data
have not been saved! Save now?”
message displays (Figure 14-14).
Complete steps 2 and 3.
If the previous job has been saved in
memory, The “ATTENTION:
Overwrite current job data?” message
displays. Complete steps 4 and 5.
2. Press F2 (Yes).
3. Enter the new job name.
Note! The job name can consist of any
alphanumeric characters. You use the
scroll buttons to enter letters and the
“-” sign and the numeric keypad to
enter numbers. Pressing the right
arrow key advances you to the next
character place; pressing the left
arrow key takes you back to the
previous character.
4. Press F2 (Yes). The glue-pattern-edit menu
displays (Figure 14-15). The new job
contains default values that can be used or
changed to create your new job:
•
Cell-to-gun values, scanner assign-
ments and the pressure tables are
copied from the last active job
(current job).
•
Delay and glue pattern lengths are
set to 0.
5. Enter new values as necessary.
Note ! You can operate the new job without
saving it. If you want to save the new
job, see “Saving a Job” at the
beginning of this section.
Figure 14-13. Job-Management Menu
Figure 14-14. Job-Management Menu with Message
Avai lable : 98 Jobs / 16.02.2001 01:57
Cur r ent Job: 1 16.01.01
Testjob1 05.10.01
Testjob2 15.12.01
New Change Prepare Rename <<<
F1 F2 F3
F4 F5
Figure 14-15. Glue-Pattern-Edit Menu
Repeat factor = 01
Delete Copy Forward Back
1
1
00000
00000
00000
00000
00000
Job: 1 [mm]
Lockout = 0 00000
MODE 0
F1
F2
F3 F4 F5
Avai lable 7 01:57
Cur r ent 16.01.01
Testjob1
Testjob2
Cancel
Current job data
have not been saved !
Save now ?
No Yes
F2
F3 F1 F4 F5