Valco baby MCP-25/MS, Руководство пользователя

Страница: 109 / 179

Section 11 — Glue-Pressure-Edit Menu MCP-25/MS
Valco Cincinnati 11-6
MC051 (June 2002)
Deleting a Current
Glue-Pressure Curve
To delete a current glue-pressure curve, follow
these steps:
1. Press F1 to select the glue-pressure
curve (table) that you want to delete.
Note! The selected pressure-transducer
(1 or 2) is seen in the pressure-
transducer symbol at the top left
of the screen.
2. Press F2 (Delete). The “Delete pressure
table?” message displays (Figure 11-7).
3. Press F2 (Yes). The pressure/speed
default values display.
F2
Changing the Glue Pressure
To change the glue pressure values individually,
follow these steps:
1. Use the arrow keys to move the cursor to the
field that you want to change (see “Glue-
Pressure-Edit Parameters” in this section).
2. Use either the numeric keypad or the scroll
buttons (+10, +1, -1, -10) to enter new values
for the field.
3. Press the ENTER button to enter the new
information into memory. (Press the ESC
button if you have entered incorrect data.)
To change all of the the glue pressure values between
the minimum and maximum columns, follow these
steps:
1. Press F3 to increase the pressure values as
required.
2. Press F4 to decrease the pressure values as
required.
Figure 11-5. Glue-Pressure-Edit Menu
Figure 11-6. Glue-Pressure-Edit Menu
Figure 11-7. Glue-Pressure-Edit Menu with Message
F1 F2 F3 F4 F5
Delete Insert
1
F1 F2 F3 F4 F5
Delete Insert
1
F1 F2 F3 F4 F5
Yes
1
Delete pressure table?
Cancel