Valco baby MCP-25/MS, Руководство пользователя

Страница: 116 / 179

Section 12 — Inspection Menu
MCP-25/MS
Valco Cincinnati 12-7 MC051 (July 2002)
F1 F2 F3 F4 F5
Tolerance Data
To inspect tolerance data, follow these steps:
1. At the inspection screen, press F3 (Tol. ?) to
display the tolerance-data screen.
(Figure 12-15).
2. Press F3 (OK) when you finish viewing the
information.
Note! Tolerance levels cannot be changed in the
tolerance-data screen. However, they can
be changed in either the inspection screen
or the setup menu.
Figure 12-15. Tolerance-Data Screen
1
2
3
4
1 — large
1 — large
1 — large
1 — large
Start : +/- 0.20 "
End : +/- 0.20 "
Total : +/- 0.50 "
Amount : +/- 050%
OK
F1
F2 F3 F4 F5
F3
Fault Data
To inspect fault data, follow these steps:
1. At the inspection screen, press F4 (Fault) to
display the fault-data screen. (Figure 12-16).
2. Press F3 (Prev.) to see up to 5 of the last faults
for a particular inspection channel.
3. If no fault button appears, there have been no
faulty products since the last counter reset.
F4
Figure 12-16. Fault-Data Screen
Fault Information
Channel : 1
Glue Line : 1
Product : -1
Measured length: 0.00
[Inch]
Prev.
No Tol.-Level