Valco baby MCP-25/MS, Руководство пользователя

Страница: 138 / 179

Section 15 — Diagnostic Menu MCP-25/MS
Valco Cincinnati
15-2
Diagnostic Parameters
1 Scanners 1-6
L = Low (not active)
H = High (active)
E = Error (One scanner has been assigned to two encoders.)
J = Jam
Note ! This diagnostic scanner menu is used when testing the scanner signal by placing your hand under
the scanner. When the parent machine is operating, use the front-panel LEDs for diagnostics.
2 Valves
L = The valve has not been selected for the current job.
H = The valve has been selected for the current job.
E = Error (The valve driver is defective or has been removed.)
- = The valve driver has not been installed.
3 Pressure transducers 1 and 2
Percent of output pressure
4 Encoders 1 and 2
Machine speed (feet or meters per minute)
5 Bypass valves 1 and 2
L = Not active
H = Active
E = Error
- = The bypass valve has not been configured (see Section 8—Setup Menu, Pressure-
Transducer Configuration)
6 Com 1 and Com 2
Computer communications interface 1 and 2
7 Sensors 1-6
L = Low (not active)
H = High (active)
E = Error (The scanner is defective or has been removed.)
Print
F1 F2 F3 F4 F5
Version
1 2 3 4
H H H H
1 2 3 4
H H H H
0/ft/min
0/ft/min
1 2 3 4 5 6
L L L L L L
6
7
4
3
2
1
10%
10%
-
-
5