Valco baby MCP-25/MS, Руководство пользователя

Страница: 79 / 179

Section 8 — Setup Menu MCP-25/MS
Valco Cincinnati 8-11 MC051 (July 2002)
Report Headers
A report header is used to identify the report.
An example of a report header is a company
name and address. To create report headers,
follow these steps:
1. Press F3 (Report). The “Report
Header” screen displays
(Figure 8-12).
2. Use the arrow keys to move the cursor
to line 1.
3. Type the report header you want to
use.
4. Either press the ENTER button or wait
3 seconds. The new value takes effect.
Section Names
A section name is used to identify the section in
which the fault occurs. An example of a section
name is the machine name. To create a section
name, follow these steps:
1. Press F4 (Section). The “Name each
Section:” screen displays
(Figure 8-13).
2. Use the arrow keys to move the cursor
to the “Section 1:” field.
3. Type the section name you want to
use.
F3
F4
Figure 8-12. ”Report Header” Screen
Mark.V Tol Section Clock
Print Header
1 - ____________________________________________
2 - ____________________________________________
3 - ____________________________________________
4 - ____________________________________________
5 - ____________________________________________
>>>
F1 F2 F3
F4 F5
Figure 8-13. ”Name each Section:” Screen
Mark.V Tol Report Clock
Name each Section:
Section 1: Section 1___
[x] Section 2: Section 2___
>>>
F1 F2 F3 F4 F5
Report Configuration
The Faults Data Report (see Figure 12-14 on the following page), which is printed from the inspection screen, is
configured in the setup menu. The following two components should be configured:
•
Report headers
•
Section names
The report header and section name can consist of any combination of alphanumeric characters. Use the scroll
buttons to enter letters and the “-” sign and the numeric keypad to enter numbers. Press the right arrow key to
advance to the next character place. Press the left arrow key to go back to the previous character.
4. Either press the ENTER button or wait 3 seconds. The new value takes effect.
5. Repeat steps 2-4 for the “Section 2:” field.
Note! In order to have a second section, the box to the left of the “Section 2:” field must be selected (see
Figure 8-13).