Valco baby MCP-25/MS, Руководство пользователя

Страница: 63 / 179

Valco Cincinnati 6-1
MC051 (July 2002)
Introduction
This section describes the initial screen, the learn screens, and the six main menus of the MCP-25/MS control.
The learn function is described in detail in
Section 13—The Learn Function . The six main menus are described in
detail in sections 9-15.
Initial Screen
Pushing the green “power” button on the front panel of the MCP-25/MS causes the initial screen (Figure 6-1) to
appear. The initial screen displays the Valco logo. When the “power” button is turned on, the MCP-25/MS is ready
to run the job that was operating when the power was turned off.
Note
! The initial screen appears
only
when power is turned on. After you access the other menus, you cannot
return to the initial screen without turning the unit off and then back on.
Figure 6-1. Initial Screen
Initial-Screen Function Keys
Section 6—Menu Overview
LCD+ Contrast Adjustment —Pressing the F1 function key lightens the display screen.
LCD- Contrast Adjustment —Pressing the F2 function key darkens the display screen.
UPGRADE —Pressing the F3 function key allows you to upgrade the control’s software so that
various options such as a level control, jam preventer, or additional valves may be activated.
Not used
Reverse —Pressing the F5 function key reverses the colors on the screen.
F1
F2
F3
F4
F5
MCP-25/MS Gl ue P atte rn C ont ro l S yst em
Upgrade
LCD + LCD -
F2 F3 F4 F5 F1