Valco baby MCP-25/MS, Руководство пользователя

Страница: 76 / 179

Section 8 — Setup Menu MCP-25/MS
Valco Cincinnati 8-8 MC051 (July 2002)
F4
Sensor and Alarm
Configuration
The optional machine-stop relay and alarm/beacon
interface are required to indicate a jam condition or
glue-inspection fault to the parent machine. To
configure the sensor and the alarm, follow these steps:
1. Press F4 (Sensor). The sensor-and-alarm
configuration screen displays (Figure 8-9).
2. Use the arrow keys to move the cursor to the
parameter ( No , Enc , CF ) you want to select
and change (see Sensor Configuration
Parameters below). Use the numeric keypad
or the scroll buttons to enter and select
values.
3. To configure the alarm (see Alarm Configu-
ration Parameters below), move the cursor to
the Cons. Flts. Max. field and press ENTER
(an X appears to show the field has been
selected).
3. Enter an X in each 24V field.
4. Move the cursor to the Cons. Flts. Max. field
and enter the number of consecutive faults
that are acceptable before activating a
machine stop.
Figure 8-9. Sensor-and-Alarm Configuration Screen
Sensor and alarm confi gur ati on
1
2
1
1
1 [ X]
1 [ ]
CF No Enc Cons. Flts
Max. 010
Other outputs
Relays 24V 24V
F1 F2 F3 F4 F5
Valve Pres. Enc 1. Enc 2.
>>>
100
100
2[ ] 3[ X] 4[ X]
2[ ] 3[ ] 4[ ]
Sensor Configuration Parameters
No —Sensor number
Enc —Encoder number
CF —Correction factor. This function adapts individual valves to variations in parent machine speed (50-150%).
The correction factor can be used in cases where valves are placed on a section of the parent machine that experi-
ences variations in web speed. The correction factor can also be used to adjust the placement of the glue pattern.
(Refer to the Operation section in this manual.)
Alarm Configuration Parameters
Cons. Flts
—Activates consecutive faults function
Note!
The number of consecutive faults must be entered
Other outputs
—Activates other alarm output (2, 3, and 4) functions (refer to wiring diagram alarm outputs).
number of consecutive faults