Tuttnauer 6671130, Руководство по эксплуатации и техническому обслуживанию

Страница: 60 / 143

MAN205-0195042EN Rev. A Aug. 2011
Page 54 of 137 pages
VacDip2
– Vacuum value in the remaining pulses
This value defines the vacuum in the remaining pulses in the pre-vacuum stage (not just
pulse no. 2)
Entry code 11
Resolution 1kPa (0.1 psi)
Minimum value 1kPa (0.15 psia)
Maximum value 75kPa (10.8 psia)
VacTime1
– Waiting time in the first pulse
In the pre-vacuum stage, in the first pulse after arriving at VacDip1, there is a waiting
time known as VacTime1 (in seconds).
This delay occurs so that air removal and vacuuming can continue.
Entry code 11
Resolution 1 second
Minimum value 3 seconds
Maximum value 1800 seconds (30
minutes)
VacTime2
– Waiting time for the remaining pulses
For the remaining pulses (following pulse no.1) in the pre-vacuum stage, after arriving at
the VacDip2 stage there is a time delay known as VacTime2 (in seconds).
Entry code 11
Resolution 1 second
Minimum value 3 seconds
Maximum value 1800 seconds (30
minutes)
WtrTime
– Time for entering the water into the generator after the electrode
touches the water.
This value defines the time (in seconds) during which the water pump continues to work
and enter water to the steam generator after the upper electrode touches water.
This is done to prevent a situation where right after the electrode touches water, the
pump immediately stops operating.
Entry code 11
Minimum value Ø second
Maximum value 90 seconds