Tuttnauer 6671130, Руководство по эксплуатации и техническому обслуживанию

Страница: 109 / 143

MAN205-0195042EN Rev. A Aug. 2011
Page 103 of 137 pages
9.10.1 Calibrating Temperature and Pressure
Return to the ST.BY screen and select the OPTION command key.
The word CALIB is displayed above the middle command key. Press the middle key and
the same screen for entering the SETUP code will appear.
Enter the correct code via the digital key; the system begins displaying the calibration
options.
Note:
1. If the code is not entered within 15 seconds, the display returns to the
ST. BY screen.
2. If the code is incorrect it will return to the ST.BY screen
3. In all screens following the code entry screen, the middle command key
is CLEAR and the right key is ENTER. Pressing on either of these keys
opens up the next screen.
4. The values in all the following screens can only be changed via the
UP/DN keys. When the correct value is displayed, press ENTER and
the system will progress to the next screen.
Once the entry code has been entered, the following screens appear:
Temp 1:
Temperature of sensor 1
This screen requires a code. Press the UP key once to enter the code value ØØ1 and
press ENTER.
A screen displaying 4 Temp values appears:
A100 (140) R100 (140)
A130 (226) R130 (226)
Press the right button (F3) to scroll through the different values, which may be changed
using the UP/DN keys only.
After F3 is pressed, when it is on the last value, the next screen will appear.
Press the middle button (F2) to read the value of the sensor.
Press STOP to discontinue a cycle.