Tuttnauer 6671130, Руководство по эксплуатации и техническому обслуживанию

Страница: 51 / 143

MAN205-0195042EN Rev. A Aug. 2011
Page 45 of 137 pages
4.3.2 Selecting a Cycle
A cycle can only be selected in Stand By from the Stand By / Ready screen which
displays the cycle number and name in the top row.
To select a cycle:
1. Press the UP/DN keys to change the cycle where pressing UP moves to the
next program and pressing DOWN moves to the previous program.
2. Press on a number; press key 4 to select program 4
Selecting a 2 digit cycle:
For programs with double digits (for program 10 or above), both numbers are to be
pressed within 2 seconds of each other. For example, to choose program 12, number 1
must be pressed, and within 2 seconds number 2 must be pressed.
Show Parameters
After selecting the cycle, when pressing the SHOW command key the following screen
is displayed:
The message displayed in the 3rd row describes the following:

The temperature; the sterilization temperature

The time; the sterilization time

D-Time; drying time.
This screen is displayed for 10 seconds after which it automatically returns to the ST.BY
screen.
This command key is not active for cycle 12
– Leak Test.