Tuttnauer 6671130, Руководство по эксплуатации и техническому обслуживанию

Страница: 132 / 143

MAN205-0195042EN Rev. A Aug. 2011
Page 126 of 137 pages
Modem Configurations
To connect to the remote target via a modem, select 'Active' check box in 'Modem
Config' frame.
'Connection Timeout' is the waiting time in seconds to request data from the PCS target
platform. If no data is retrieved from the target after the waiting time, the program
generates a communication time error.
'Dial Time Out' is a waiting time in seconds to be used by the local modem trying to
connect to the remote modem. After this time has elapsed, the program generates a
timeout error.
'Phone Number' is the phone number dialed to a specific destination.
Download Setting Configuration
If 'Get and set Gain Offset' are checked, when the program downloads, all gain and
offset values will be stored before PCS code downloading, and restored after
downloading is completed.
If 'Get and Set Parameters' are checked, when the program downloads, all parameters
will be stored before PCS code downloading and restored after downloading is
completed.
Note:
The program stores parameters only in these conditions:

CAT Technologies ADMC Program Installed on PC.

The Downloaded file (DWN) has the same name as one of the ADMC type
files (for example if downloaded file name is: LabTN2.DWN, the ADMC file is
compatible, because ADMC type files: LabTN2.mdb exists).
Note:
Only current selected Program (For example: 1-Instruments) parameters will be
saved and restored.
Note:
Because the PCS target platform parameters saving process are complex,
restoring Parameters task takes long time (few minutes)!
Note:
There is no need to edit options every time that the program starts running. The
program saves the settings by pressing the 'OK' button and starts up with the
last settings.