E6581442
F-21
6
Adjustment with continuous signals (Parameter setting example 1)
Set parameters as follows to adjust the output frequency up or down in proportion to the frequency adjustment signal
input time:
Panel frequency incremental gradient =
/
setting time
Panel frequency decremental gradient =
/
setting time
Set parameters as follows to adjust the output frequency up or down almost in synchronization with the adjustment by
the panel frequency command:
=
=
(
(or
) /
)
(
/
setting time)
(
(or
) /
)
(
/
setting time)
«Sample sequence diagram 1: Adjustment with continuous signals»
The dotted line represents the actual output frequency.
Frequency 0 Hz
Lower limit frequency
Upper limit frequency
Decrementing (DOWN) signal
Incrementing (UP)
RUN command
Set frequency clearing signal
Command frequency [Hz]
Gradient
/
Gradient
/
Adjustment with pulse signals (Parameter-setting example 2)
Set parameters as follows to adjust the frequency in steps of one pulse:
,
Pulse ON time
,
=
Frequency obtained with each pulse
* The inverter does not respond to any pulses with an ON time shorter than set with
or
. 12ms
or more of clearing signal is allowed.
«Sample sequence diagram 2: Adjustment with pulse signals»
Operation command (such as F)
Incrementing (UP) signal
Decrementing (DOWN) signal
Clear signal
Upper limit frequency
0Hz
Command frequency [Hz]
(The dotted line represents
the actual output frequency.)
Содержание TOSVERT VF-AS1 Series
Страница 238: ...E6581442 I 7 9 ...
Страница 261: ...E6581442 J 13 10 VFAS1 4200KPC 4280KPC VFAS1 4355KPC 4400KPC 4500KPC ...
Страница 321: ...E6581442 M 3 13 Continued overleaf ...
