Toshiba TOSVERT VF-AS1 Series, Инструкция по эксплуатации

Страница: 61 / 334

E6581442
C-3
3
3.2 Simplified operation of the VF-AS1
On of three operation modes can be selected: terminal board operation, operation panel and combination of both.

For other operation modes, refer to Section 5.5.
Terminal board mode :Operation by means of external signals
Operation panel mode :Operation by pressing keys on the operation panel
Operation panel + terminal board mode :Frequency, start/stop signals can be
sent individually from the operating panel and terminal board.
3.2.1 Terminal board operation
In this mode, the motor is started or stopped according to the ON/OFF signal to input terminals (such as the S3
terminal and the F terminal). Also, the frequency is set according to the potentiometer/voltage/current signals to
analog input terminals (such as the RR/S4 terminal, VI/II terminal and RX terminal).

For more details, refer to Section 7.

Example of standard connection
Motor
IM
CCA RX VI/II RR/S4 PP
F
R
P24/PLC
R/L1
U/T1
External potentiometer (or voltage signal RR/S4-CCA:0 to 10Vdc)
Voltage signal:-10~+10Vdc
Voltage signal:0~10Vdc
or current signal:4(0)~20mAdc
ON:Forward run, OFF:Deceleration stop
Stand-by:ON:Stand-by, OFF:Coast stop
(Set the parameters

to

and

to

to
assign the standby signal
input function to the S3
terminal.)
CC
ON:Reverse run, OFF:Deceleration stop
V/T2
W/T3
S/L2
T/L3
Power
supply
MCCB
Inverter
PWR
S3

Run/Deceleration stop Selecting a command mode for basic parameters

=

(standard default setting)
and
are connected: Forward run
and
are disconnected: Deceleration stop
(When terminals and are electrically connected)
F CC
F
CC
P24/PLC PWR
Frequency
ON
OFF
ON
OFF
F-CC
Deceleration
S3-CC
 For coast stop
Open the connection between S3 and CC
when stopping the motor in the state
described at left. The monitor on the inverter
at this time will display

.
Motor
speed
ON
OFF
ON
OFF
F-CC
S3-CC
Coast stop