Toshiba ESTUDIO170F, Руководство по обслуживанию

Страница: 64 / 492

e-STUDIO170F Function Settings January 2005 © TOSHIBA TEC
4 - 4
5) Select the desired option using the [ Ç ] or [ È ] keys, then press the [ENTER] key.
24 HOURS
Selected to display the time in the 24-hour system. For setting the time, you can enter in the follow-
ing range:
Hour Value: 00 through 23
Minute Value: 00 through 59
12 HOURS
Selected to display the time in the 12-hour system. For setting the time, you can enter in the follow-
ing range:
Hour Value: 00 through 12
Minute Value: 00 through 59
6) Move the cursor using the [ Æ ] key and set the time.
HH:MM
Set the values within the range specified by the Hour Value (HH) and Minute Value (MM) above.
If the value is outside the range, it must be set again. If the 12 Hour format is selected, then you will
be directed to choose AM or PM after the Minute data is set.
7) Press the [ENTER] key.
8) After the “COMPLETED” message is displayed, press the [STOP] key to return to the Standby Mode
screen.
[ 3 ] Terminal ID [MENU], [4], [3]
This setting is performed to enter your own telephone (fax) number, terminal ID name and add the inter-
national code which will be printed as TTI at the top of the received document on the remote party side.
1) Entry the terminal ID name using the numeric keypad, then press the [ENTER] key.
NAME
A maximum of 40 digits can be entered including blank spaces. Refer to the section of Character
Entries in the Operator’s Manual.
TIME FORMAT
2 . 12 HOURS
1 . 24 HOURS
TIME
For 12-hour format
or
For 24-hour format
[09:43]
TIME
[09:43 AM]
NAME (40MAX)
[ ]