Toshiba ESTUDIO170F, Руководство по обслуживанию

Страница: 379 / 492

9
January 2005 © TOSHIBA TEC e-STUDIO170F Dialing and Communication Procedure
9 - 7
[ 2 ] Binary signals
NSF Non-Standard Facility
Informs that the receiving station (machine) has a non-standard facility (i.e., HS/ECM, etc.).
NSC Non-Standard Facility Command
Commands to transmit with the non-standard facility which is selected corresponding to NSF (i.e.,
Polling etc.).
NSS Non-Standard Facility Set-up
Commands to transmit with the non-standard facility which is selected corresponding to NSF or NSC.
CSI Called Station Identification
Provides the telephone number of the called station. Used to check the identity of the called station.
CIG Calling Station Identification
Provides the telephone number of the calling station. Used to check the identity of the calling station
(Polling, etc.).
TSI Transmitting Station Identification
Provides the telephone number of transmitting station. Used to check the identity of the transmission
station.
DIS Digital Identification Signal
Informs that the receiving station (machine) has a standard facility (G3/G2).
DTC Digital Transmit Command
Commands to transmit with the standard facility which is selected corresponding to DIS (i.e., Polling,
etc.).
DCS Digital Command Signal
Commands to transmit with the standard facility which is selected corresponding to DIS or DTC.
CFR Confirmation to Receive
Informs that the facsimile is in the receivable status.
FTT Failure to Train
Informs that the TCF signal has not received correctly and requests re-training.
EOM End of Message
Informs that a document has been transmitted and another document is loaded; commands to return
to the beginning of phase B.
MPS Multi-page Signal
Informs that a document has been transmitted and another document is loaded; commands to return
to the beginning of phase C.
EOP End of Procedure
Informs that a document has been transmitted and no additional documents are loaded.
MCF Message Conformation
A reply of MPS, EOM, or EOP; informs that picture signals have been received correctly. For EOM
and MPS, informs that the facsimile is in the receivable status.
RTN Retrain Negative
Informs that a document has not been received correctly; demands a re-training (HS/G3) or phase sig-
nal (G2) before receiving another document.
PIP Procedure Interrupt Positive
Informs that a document has been received correctly and demands a voice reply by telephone or to
return to the beginning of phase B in order to receive another document (i.e., CALL Request, etc.).
PIN Procedure Interrupt Negative
Informs that a document has not been received correctly and demands a voice reply by telephone or
to return to the beginning of phase B in order to receive another document.
DCN Disconnect
Commands to disconnect the FAX line and to connect the telephone line. A reply is not required.