Toshiba ESTUDIO170F, Руководство по обслуживанию

Страница: 16 / 492

e-STUDIO170F Introduction January 2005 © TOSHIBA TEC
1 - 10
17)STOP key
Used to stop an operation or cancel programming. This key is also used to clear an error condition.
18)COPY key
Press this key with a document in the document support to copy a document.
19)SAVER key and SUPER ENERGY SAVER lamp
Press this key to select the super energy saver mode. Illuminates when the facsimile is in the super
energy saver mode.
20)MONITOR key
Used to enable the Speaker monitor, for dialing numbers without picking up the handset in direct
document transmission mode.
21)REDIAL/PAUSE key
Press this key to redial a facsimile/telephone number if the line was busy on the first try. Press this
key to enter a pause between digits of a facsimile number during a number entering operation.
22)SPEED DIAL/ALPHA key
Used for transmissions using abbreviated dialing numbers, alphabet dialing, or group dialing.
23)MULTI/CHARGE CODE key
Press this key to perform a multi-address transmission (broadcast) or a multi-polling reception. This
key also used to input the charge code.
24)JOB CANCEL key
Used to cancel a job reserved or being executed.