Toshiba ESTUDIO170F, Руководство по обслуживанию

Страница: 158 / 492

e-STUDIO170F Function Settings January 2005 © TOSHIBA TEC
4 - 98
• UAD 2
Remark:
UAD 2 Bit 7 to 5:
Sets the range of the dial tone frequency that should be detected when calling through a PABX.
UAD 2 Bit 4 to 2:
Sets the time when the dial tone is recognized when calling through a PABX. When a dial tone is
continuously detected for the time specified in this setting, the facsimile regards the line as being
connected.
UAD 2 Bit 1 and 0:
Set the allowable gap during line current detection when calling through a PABX. In line current
detection, even if there are gaps within the time specified in this setting, the counter is not reset
and continues to count the duration of line current detection after the current is re-detected.
Default table
Bit Contents
Link with User
Function Setting
7
6
5
Range of dial tone frequency (PABX):
000: 300 Hz to 600 Hz
001: 300 Hz to 650 Hz
010: 390 Hz to 550 Hz
011: 400 Hz to 450 Hz
100: 350 Hz to 480 Hz
101: 300 Hz to 500 Hz
110: Undefined
111: Undefined
-
4
3
2
Detection time to recognize as dial tone (PABX):
000: 2 sec.
001: 800 msec.
010: 400 msec.
011: 1 sec.
100: 1.3 sec.
101: 1.8 sec.
110: 2.5 sec.
111: 150 msec.
-
1
0
Allowable gap during line current detection (PABX):
00: Off
01: 50 msec.
10: 100 msec.
11: 200 msec.
-
BIT US CA SG HK DE GB IT BE NL FI ES AT CH SE DK NO PT FR AU
7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1