Toshiba ESTUDIO170F, Руководство по обслуживанию

Страница: 70 / 492

e-STUDIO170F Function Settings January 2005 © TOSHIBA TEC
4 - 10
When PRINTER P.S. is selected:
The screen below is displayed.
- Use the [ Ç ] or [ È ] keys to select the desired option (ON or OFF), then press [ENTER].
ON
To select the Printer Power Saver mode.
OFF
To deactivate the Printer Power Saver mode.
When ON is selected, the screen below is displayed. Enter the desired TIME period and press
the [ENTER] key.
Enter the time period. The time on the left is the Printer Power Saver start time (or time that the
printer unit will power down). The time on the right is the Printer Power Saver end time.
The time period shown above is the factory default setting and signifies continuous Printer Power
Saver operation.
2) After the “COMPLETED” message is displayed, press the [STOP] key to return to the Standby Mode
Screen.
[ 6 ] Department Code [MENU], [5], [1], [03]
This is a security and accounting function that restricts use of the unit to valid department codes.
1) Use the [ Ç ] or [ È ] keys to select the desired option (YES or NO), then press the [ENTER] key.
YES
To select the Department Code function. In this case, Department Number, Department Name, and
Department Codes are to be set next. The first time this feature is selected, the Master Code will be
set. The Master Code is required to set subsequent department codes, or to turn the Department
Code feature OFF.
NO
Not to select the Department Code function, or to set the Department Code feature OFF if it was
previously set to ON.
PRINTER P.S.
1 . ON
2 . OFF
START/STOP TIME
[00:00-00:00]
SET DEPT. CODE
2 . NO
1 . YES