Toshiba ESTUDIO170F, Руководство по обслуживанию

Страница: 74 / 492

e-STUDIO170F Function Settings January 2005 © TOSHIBA TEC
4 - 14
[ 10 ] ECM (Error Correction Mode) [MENU], [5], [1], [07]
This is to set whether the Error Correction Mode (ECM) which automatically corrects image data
affected by line noise or distortion is to be activated or not.
1) Use the [ Ç ] or [ È ] keys to select the desired option (ON or OFF), then press the [ENTER] key.
ON
To activate the ECM function.
OFF
To deactivate the ECM function. In this case, part of the ECM buffer is available to be used as image
(PIX) memory.
2) After the “COMPLETED” message is displayed, press the [STOP] key to return to the Standby
Mode.
[ 11 ] Sort Copy [MENU], [5], [1], [08]
When copying documents, the SORT function may be selected. This function will sort multiple page
copies into sets of correct-order pages.
This setting establishes the default for the Sort Copy function. Sort Copy may, also, be set manually at
the time the copy operation is performed.
Notes:
• The pages are automatically sorted.
• Requires enough memory for the entire multi-page document. If there is not enough memory
(memory overflow), the copying procedure will be canceled.
• Collation is slower than non-collation because the entire document must be scanned into
memory first, then printing can occur.
• Sorting is the responsibility of the operator.
• Memory requirements are limited to one page at a time.
1) Use the [
Ç
] or [
È
] keys to select the desired option (ON or OFF), then press the [ENTER] key.
ON
The pages are automatically sorted.
OFF
Not sorted the paper.
2) After the “COMPLETED” message is displayed, press the [STOP] key to return to the Standby Mode
screen.
ECM
1 . ON
2 . OFF
SORT COPY
2 . OFF
1 . ON