Toshiba ESTUDIO170F, Руководство по обслуживанию

Страница: 15 / 492

1
January 2005 © TOSHIBA TEC e-STUDIO170F Introduction
1 - 9
8) Direct Function Access Keys
Frequently used functions are preassigned. Operations using these special one touch keys are
called “Direct Function Access Operations.”
- DIRECT SEND key
Used to send a document in direct document transmission mode (i.e. real time transmission
directly from the ADF).
- TX REPORT key
Press this key to designate whether or not to issue a transmission report for a particular trans-
mission.
- CHAIN DIAL key
Used to dial a remote party using the chain dialing method.
- JOURNAL key
Used to print a communication journal.
- AUTO key
Select the facsimile reception mode such as Auto Receive, Fax/Tad, Tel/Fax and Manual
Receive.
9) One touch keys
These keys allow you to send documents to the desired remote party with just one keystroke.
10)SHIFT key
Press this key prior to selecting the one touch keys (No. 20 to No. 38).
11)CONTRAST key, DARKER lamp and LIGHTER lamp
Select the contrast level of scanning documents. The lamp(s) for the selected contrast lights. When
normal mode is selected, all these lamps are off.
12)Menu keys ( , , , keys)
These keys are used to designate the required item by moving the desired screen or cursor through
the LCD display.
13)ENTER key
Press this key to enter a selected menu item or select a menu entry.
14)MODE key, FINE lamp, U-FINE lamp and HALFTONE lamp
Selects the resolution for transmission. The lamp(s) for the selected resolution lights.
When standard mode is selected, all these lamps are off.
15)Dial keypad
Use these 12 keys just like the keypad on a standard telephone to dial telephone/facsimile numbers.
These keys are also used to enter alphanumeric characters for the remote party’s names, etc.
The key is also used to access various services using touch-tone dialing when you
use a dial pulse (DP) line.
16)START key
Press this key when ready to send or receive a document during manual communication operations.
This key is also used to complete programming.
MENU