Toshiba ESTUDIO170F, Руководство по обслуживанию

Страница: 431 / 492

11
January 2005 © TOSHIBA TEC e-STUDIO170F Troubleshooting
11 - 19
[ 5 ] SENSOR TEST [MENU], [9], [4], [05]
This test checks the actions of various sensors. The results are displayed on the LCD in the form of
binary data. The displayed data will be changed by changing the state or status of the applicable sen-
sor.
1) Use the [ Ç ] or [ È ] key to select “05. SENSOR TEST”, and then press the [ENTER] key.
Remark:
The binary data on the LCD display means and its set contents the following.
2) When you complete the check, press the [STOP] key to return to the standby mode screen.
3) Depending on the result of the test, replace the applicable sensor, Operation panel assembly, etc.
referring to P.8-1 "8. Removal/Replacement/Adjustment".
Document sensor detect
(0: Absence/1: Presence)
Document position sensor detect
(0: Absence/1: Presence)
Not used
Top cover open detect
(0: Open/1: Closed)
Optional tray sensor detect
(0: Absence/1: Presence)
Optional paper end sensor detect
(0: Absence/1: Presence)
Paper end sensor detect
(0: Absence/1: Presence)
SENSOR CHECK
X XXX XX X