Toshiba ESTUDIO170F, Руководство по обслуживанию

Страница: 85 / 492

4
January 2005 © TOSHIBA TEC e-STUDIO170F Function Settings
4 - 25
[ 5 ] TTI (Transmit Terminal ID) [MENU], [5], [3], [05]
This is to set whether or not the TTI (Transmit Terminal ID) is to be attached as a header on the sending
documents.
The following data is included in the TTI.
Date and Start Time
The date and start time the document transmission started.
Transmitting station ID Name
The ID name preset in your facsimile unit (if not preset, the telephone number of your facsimile unit).
Maximum of 40 characters.
Transmission Serial Number
A 3-digit serial number assigned to and counted up on every transmission.
Page Number/Total Number of Pages
Each page of the document is printed with a page number followed by the total number of pages in
the document (e.g. 001/003 means the first page of three total pages).
File Number
A 3-digit file number (job number) assigned to each job.
1) Use the [ Ç ] or [ È ] keys to select the desired option (INSIDE, OUTSIDE, or OFF), then press the
[ENTER] key.
INSIDE
To record TTI inside the document data.
OUTSIDE
To record TTI outside the document data.
OFF
TTI is not recorded.
Remarks:
• When the recording image is divided into multiple pages on the receiving station, the TTI is
not recorded on second pages of the divided image.
• The following shows the definitions of the Inside-document TTI and Outside-document TTI.
• FCC regulations require that all facsimiles identify themselves (by name and phone number)
and provide the date and time of the transmission. It is recommended that the dealer program
this information for the end-user during set-up or installation. The position selection should
also be confirmed as either INSIDE or OUTSIDE.
2) After the “COMPLETED” message is displayed, press the [STOP] key to return to the Standby Mode
screen.
TTI
1 . INSIDE
2 . OUTSIDE
3 . OFF