Toshiba E-STUDIO2006, Руководство по обслуживанию

Страница: 265 / 730

5
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
SELF-DIAGNOSIS MODES
5 - 9
Procedure 6
* When the automatic adjustment ends abnormally, error message is displayed. Return to “TEST
MODE A” screen by pressing the [CANCEL] button.
Procedure 7
When the automatic adjustment ends abnormally, error message is displayed. Return to “TEST MODE
A” screen by pressing the [CANCEL] button.
Procedure 10
Procedure 17
* The automatic adjustment starts when 2 minutes have passed after the [START] button is pressed.
Notes:
The fuser roller temperature control at the adjustment mode is different from that at the normal
state.
Therefore, the problem of fusing efficiency may be occurred in the test copy at the adjustment
mode. In that case, turn ON the power normally, leave the equipment for approx. 3 minutes after
it has become ready state and then start up the adjustment mode again.
[0][5]
[POWER]
[POWER]OFF/ON
(Exit)
(Code)
[START]
( )
Automatic
adjustment
*[CANCEL]
[OK]
[SETTINGS]
(Test copy)
[STAR T]
[0][5]
[POWER]
[POWER]
OFF/ON
(Exit)
(Code) [START]
( )
Automatic
adjustment
*[CANCEL]
[OK]
Select “Yes”
or “No” using
the arrow button
(Select)
[SETTINGS]
(Test copy)
[STAR T]
[0][5]
[POWER]
[POWER]
OFF/ON
(Exit)
(Code)
[Digital key]
(Sub code)
[START] [START]
[OK]
(Value unchangeable)
( )
Value
displayed
[SETTINGS]
(Test copy)
[START]
[0][5]
[POWER]
(Code)
[START]
[UP]
or
[DOWN]
(Adjust a value)
Stores value
[POWER]
OFF/ON
(Exit)
[CLEAR/STOP]
[OK]
[SETTINGS]
(Test copy)
[START]