Tokyo Keiki UFL-30 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 166

background image

(7)

Introduction

Thank you for your selecting our Ultrasonic Flowmeter.
This Manual includes detailed explanations regarding safety cautions, structure, set up,
operation, troubleshooting, and maintenance of the Ultrasonic Flowmeter.
Read this manual carefully before operation to ensure an adequate understanding of the
equipment.

Proper use of the Operation Manual

The following points must be observed:

CAUTION

1. Carefully read the Manual. The contents of this Manual are very important and should

be read completely.

2. Store the Manual in a safe location. The Manual is essential for appropriate operation

of the equipment. Store the manual in a safe and accessible location. The storage
location and person in charge should be determined after careful consideration.

3. Ensure that the Manual is supplied to the operator of the equipment. The

representative or dealer of this equipment must provide this Manual to the user who
will actually operate the equipment.

4. The Manual must be replaced if lost or damaged. If the Manual is lost, contact the

representative. A new manual is available for purchase.

5. Ensure that the warning label is properly attached. If the warning label is illegible or

has come off, contact the manufacturer to purchase a new label.

Precautions regarding the Manual

This Manual was written in accordance with the standard specifications of the original
instrument.
In case of discrepancies between written specifications and approved drawings, the
drawings should be given precedence.

Restrictions and precautions necessary to maintain the equipment

The following items must be observed in order to maintain the equipment.

CAUTION

1. Do not drop or bump the unit and the transducer.
2. Do not use the unit in environmental conditions (ambient temperature, ambient

humidity) other than those prescribed in this manual.

3. Do not use the unit with a power supply other than the one prescribed in this manual.
4. Do not use damaged or worn-out cables (power cables, coaxial cables, signal

cables).

5. The device contains high-voltage circuit boards. Never, under any circumstances,

touch terminals or the inside of the device when the power is on.

6. The device is operated via the opened panel (display, keyboard) of the main

flowmeter unit. Do not manipulate electrical circuits (printed circuit boards, electrical
parts, etc.) inside the panel.

7. Under no circumstances attempt to modify or disassemble the instrument. Contact

the manufacturer in the event of a malfunction.

8. Do not use the unit and/or accessories in restricted hazardous areas.

Disposal

In EU area, do not dispose this equipment as household waste, please contact with the
nearest representatives. (WEEE directive 2002/96/EG)

«
...
6
7
8
9
10
...
»

Содержание UFL-30







































































































































































Отзывы:

Нет отзывов

Похожие инструкции для UFL-30

Бренд: WAGER Страницы: 22

Бренд: Landis+Gyr Страницы: 10

Бренд: OBD Страницы: 5

Бренд: SOMFY Страницы: 40

TEMS AUTOMATIC - 2

Бренд: ASCOM Страницы: 12

Ratio:Guard Advanced

Бренд: H.E. Anderson Страницы: 9

Бренд: Hach Страницы: 2

Бренд: Hanna Instruments Страницы: 28

Бренд: UEi Страницы: 16

Бренд: Keysight Technologies Страницы: 10

Radon Scout Home

Бренд: SARAD Страницы: 2

Бренд: BAPI Страницы: 3

SXP30 - ELECTRONIC PIANO

Бренд: Technics Страницы: 12

Бренд: Keller Страницы: 8

Бренд: Kawai Страницы: 72

Бренд: Apera Instruments Страницы: 30

Бренд: PCE Instruments Страницы: 10

MachineryMate 800

Бренд: Meggitt Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды