Tokyo Keiki UFL-30, Руководство по установке и эксплуатации

Страница: 49 / 166

Step 3; Core part treatment
1. Measure 3mm from shield return point.
2. Make slit at the point where 3mm from folding
back shields checked on above.
NOTE: Do not damage core part by over slitting.
Please remain sheath thickness as
around 0.1mm at least.
3. Twisting core sheath for let slit larger.
4. W
ring off the core sheath slowly.
5. Confirm 3mm core cable as left as below.
6. Cut core cable left as 10mm.
7. Completed.
Note; When you would like to soldering
treatment as additional, we recommend
to do it only at the tip. Otherwise core
might break at the base.
3mm
10mm
3mm
I- 38