ThermoFisher Scientific Vanquish VC-D50, Руководство по эксплуатации

Страница: 74 / 188

5 • Installation
Page 74 Fluorescence Detectors (VC-D50, VC-D51, VF-D50, VF-D51)
Operating Manual
NOTICE
Be aware of the backpressure limit of the flow cell in the Vanquish UV/
VIS detector connected in the flow path before the fluorescence
detector. Connect the capillary from the UV/VIS detector directly to the
fluorescence detector flow cell inlet. Avoid connecting any additional
components in the flow path between the two detectors. Refer to the
Operating Manual for the UV/VIS detector .
Figure 24: Connecting the inlet capillary from the diode array detector
(example)
1. Connect the inlet capillary from the column compartment to the
flow cell inlet of the first detector. Refer to the instructions in the
Operating Manual for the first detector in the Vanquish system flow
path.
2. Route the connecting capillary from the flow cell outlet of the first
detector upward to the fluorescence detector.
3. On the leak tray of the fluorescence detector, pull the capillary clip
carefully to the right to open the clip.
4. Position the capillary behind the capillary clip.
5. Carefully release the clip and take care not to clamp the capillary.
The capillary must be secured behind the clip.