ThermoFisher Scientific Vanquish VC-D50, Руководство по эксплуатации

Страница: 139 / 188

7 • Maintenance and Service
Fluorescence Detectors (VC-D50, VC-D51, VF-D50, VF-D51)
Operating Manual Page 139
7.7.4 Installing the Flow Cell
Parts required
Flow cell
Follow these steps
1. Insert the flow cell straight into the flow cell opening.
Figure 37: Inserting the flow cell
2. Tighten the flow cell screws hand-tight.
3. Install the capillaries to the flow cell. Follow the instructions in
Setting Up the Flow Connections (
}
page 64) . Turn on the flow and
check that all connections are tight.
4. Close the device doors to allow detection of the flow cell. As an
alternative, press the INIT button on the keypad.
5. Perform wavelength calibration.
See also
2
Performing a Wavelength Calibration (
}
page 132)