ThermoFisher Scientific Vanquish VC-D50, Руководство по эксплуатации

Страница: 128 / 188

7 • Maintenance and Service
Page 128 Fluorescence Detectors (VC-D50, VC-D51, VF-D50, VF-D51)
Operating Manual
7.4 Routine and Preventive Maintenance
Optimum device performance, maximum uptime of the device, and
accurate results can be obtained only if the device is in good condition
and properly maintained.
7.4.1 Maintenance Plan
Perform the maintenance procedures in the table on a regular basis. The
frequency given in the table is a suggestion. The optimum frequency for
maintenance depends on several factors, such as the types and amounts
of samples and solvents used with the device.
Frequency What you should do...
Daily • Inspect the flow connections for signs of leakage or
blockage.
• When you use buffers or salt solutions, flush the device
thoroughly after use with an appropriate solvent that
does not contain buffers or salts. Monitor the
backpressure that the flow cell is exposed to.
Regularly • Inspect the flow connections for damage, such as cracks,
nicks, cuts, or blockage.
• Perform operational qualification and check the lamp age
as required by the application.
• Check that all warning labels are still present on the
device and clearly legible. If they are not, contact Thermo
Fisher Scientific for replacement.
Annually Have Thermo Fisher Scientific service personnel perform
preventive maintenance once a year.
TIP The Chromeleon software supports functions for monitoring and
recording service and qualification information (see Monitoring the
Lamp Age ( } page 131) ).
7.4.2 Cleaning or Decontaminating the Device
Cleaning and decontamination must be performed by qualified
personnel wearing suitable personal protective equipment. Always
observe national and local regulations.
NOTICE
Wipe up all liquids spilled onto the system immediately. If surfaces are
exposed for longer periods, these liquids can cause damage.