manualshive.com logo in svg

TEREXLIFT Agrilift 625, Руководство оператора, Страница: 83 / 146

Поделиться
Скачать
TEREXLIFT Agrilift 625 Скачать руководство пользователя страница 83

Page

  

D-9

MAINTENANCE

Document 57.0003.4200 - 03/2005

Handler with telescopic boom 

 Agrilift 625 - Telelift 2506

 D-3.5  BRAKES

•

For any intervention on the braking system
(adjustment and/or substitution of the brake discs)
call in a specialised technician.

The malfunctioning of the braking system may depend
on the presence of air within the hydraulic circuit.

The braking system has two bleeding valves: valve 

for the service brake circuit and valve 

 for the negative

parking brake circuit.

To bleed the circuit of the service brake:
• Make sure that the oil is level within the feeding tank

.

• Step on the brake pedal repeatedly.

• Slowly unscrew valve 

 and re-close it as soon as

oil mixed with air bubbles comes out.

• Repeat the operation until bubble-free oil comes

out.

• Bleed from both sides of the machine.

To bleed the circuit of the negative parking brake:
• Press the parking brake button 

. As soon as the

light indicator on the button goes off, start bleeding
through valve 

 until air-free oil comes out.

Level

 D-3.5.1  Checking the brake oil level

The oil within the braking circuit must be at about 2 cm
from the tank plug 

.

C

A

Courtesy of Crane.Market 

Содержание Agrilift 625



















































































































































Отзывы:

Нет отзывов